Bring home KENT Tap Guard, an all-new On-tap purifier with advanced hollow fiber UF membrane to provide bacteria-free purified water on your taps in wash basins and kitchen sinks for brushing, rinsing mouth, and washing fruits, vegetables, meat, etc. In homes, the water you get in your wash basins or sinks is stored in overhead tanks. Over a period of time, viruses or bacteria may develop in this water, and when this water is used for brushing or washing, it can make your family fall sick.
To access clean water, install the KENT Tap Guard that traps even the most microscopic contaminants and filters out bacteria and cysts from water without removing the calcium, magnesium, and other minerals essential to the human body.
KENT Tap Guard comes with an advanced multilayer hollow fiber UF membrane to trap even the most microscopic contaminants such as bacteria, microorganisms, cysts, etc without removing the calcium, magnesium, and other minerals essential to the human body.
The water from the overhead tank may be contaminated with harmful bacteria & viruses. Rinsing your mouth, brushing your teeth, or washing your fruits & vegetables with this water may leave bacteria in your mouth or on your fruits and veggies. To avoid this, install KENT Tap Guard that eliminates bacteria & viruses, and provides clean water for brushing and washing purposes.
It comes with an easy-to-use 3-mode water selection lever. You can choose Purified Water, Unfiltered Straight, or Unfiltered Spray for the water that suits your needs. Also, you can run up to 50 degrees Celsius water through Unfiltered Straight and Unfiltered Spray, thus there is no need to adjust for dishwashing and other kitchen chores.
It uses high-grade granular activated carbon, a powerful dichlorination agent, to remove residual chlorine and therefore the unpleasant odor of chlorine from the unfiltered tap water.
It comes with a see-through window which means that now you can see contaminants build up inside. Just remove the filter cartridge cap and you can check build-up contaminants easily at any time.
It does not use any chemicals including chlorine, bromine, or iodine to purify water.
Model Name | KENT Tap Guard |
Mounting | On Tap |
Net Weight | 425 Grams |
Casing Material | ABS Engineering Plastic |
Product Dimension | 145 (L)*65 (W) * 110 (H) |
Operating Water Pressure (Min/Max) | 0.1 Mpa to 0.4 Mpa |
Operating Temperature (Min/ Max) | 5°C to 35°C |
Filter Material: | Hollow Fibre UF Membrane (polysulfide) |
Excellent Product. Good Design. Good build quality. Both the product and filter made in Japan.
Excellent Product. Good Design. Good build quality. Both the product and filter made in Japan.
water was stagnating and hence we used to get bad smell). After fixing the purifier we no longer ... Reviewed in Bangladesh on 18 November 2023 Plus Points After fixing the 1) Water is clear 2) Water does not smell (This had been a major issue as the neighbur had been out of station and the common pipeline was not used and the water was stagnating and hence we used to get bad smell). After fixing the purifier we no longer get the smell. Minus Points 1) Initially struggled with getting it fixed to the tap 2) The Company can provide additional clamps of different size
Kent Tap Guard Filter Good product! Excellent product with accessories to fit all tap configurations. Only problem that I face is availability of replacement filter cartridges. I found that back washing every week is necessary to maintain reasonable flow through filter. The flow is low but it is expected with such a small catrridge.